Tapping Saddle (to suit ISO uPvc Pipe)
Product Specifications
| Materials: |
Gunmetal (LG2) BS1400:1986 -
BS EN 1982:1999
|
| Bolts: |
Gunmetal (LG2) BS1400:1986 -
BS EN 1982:1999
|
| Seals: |
Nitrile Rubber |
Features:
- The lip seal is activated by water pressure, not direct
compression. This means the pressure on the outside of the pipe is
the same as on the inside of the pipeline (very important when used
with uPVC Pipe and it's cold flowing characteristics)
- Bands are supplied with secure well tested brass bolts integral
to the casting on the bottom half of the band.
- You do not have dissimilar metal corrosion on this option.
- The seal is water tight with minimal torque on the bolts.
- The bands have been made to suit uPVC Pipe OD conforming to
ISO4422 standards.
- Each unit is complete at time of dispatch, including BSP
Tapping.
- Tapping sizes available are 15mm, 20mm, 25mm, 32mm, 40mm or
50mm BSPT.
- All other threads such as American Standards Threads are priced
on request.
**Please note these products are made to order in
minimum quantities of 1000**
Technical Data:
| Size |
Suitable
for ISO 4422
m, o & uPVC Pipe (OD) |
Tapping Range Available |
50mm
63mm |
Poly Pipe
Poly Pipe |
from ½" up to 1"
from ½" up to 1" |
80mm
100mm |
89mm to 91mm
108mm to 112mm |
from ½" up to 2"
from ½" up to 2" |
| 150mm |
159mm to 162mm |
from ½" up to 2" |
| 200mm |
197mm to 202mm |
from ½" up to 2" |
| 250mm |
270mm |
from ½" up to 2" |
| 300mm |
313.3mm to 316mm |
from ½" up to 2" |
|
300mm DICL
(ISO 2531)
|
326mm |
from ½" up to 2" |