AC/DI Tapping Strap
Product Specifications
Materials: Gunmetal (LG2) BS1400:1986 - BS EN
1982:1999
Bolts: Stainless Steel G316
Seals: Nitrile Rubber
Features:
- The Lip seal is activated by water pressure, not direct
compression. This means the pressure on the outside of the pipe is
the same as on the inside of the pipeline (very important when used
with uPVC Pipe and it's cold flowing characteristics and
susceptibility to lineal cracking).
- S/S G316 Bolts, washers and nuts are used.
- Bands can be supplied with brass bolts as integral casting on
the bottom half of the band (information on request).
- You do not have dissimilar metal corrosion on this option.
- The seal is water tight with minimal torque on the bolts.
- The bands have been made to suit AC Pipe manufactured in U.A.E.
and other sizes.
- Each unit is complete at time of dispatch, including BSP
Tapping, or can be ordered un-tapped.
**Please note these products are made to order in
minimum quantities of 1000**
Technical Data:
Pipe Size BSAC100
& BSAC150 |
Pipe OD at Spigot |
Suitable for
BS486/1966 Imperial AC and BS486/1988 Metric
AC
|
Tapping Range Available |
| 100mm (4") |
126mm |
121.9mm to 127mm |
from ½" up to 2" |
| 150mm (6") |
178mm |
175.8mm to 179.2mm |
from ½" up to 2" |
| 200mm (8") |
234mm |
232mm to 236.6mm |
from ½" up to 2" |
| 250mm (10") |
288mm |
285mm to 291.2mm |
from ½" up to 2" |
| 300mm (12") |
344mm |
on request |
from ½" up to 2" |
| 350mm (14") |
402mm |
on request |
from ½" up to 2" |
| 400mm (16") |
456mm |
on request |
from ½" up to 2" |